Simpson Strong-Tie PBV10PC 10-Inch Black Powder-Coated Hidden Standoff Post Base
by: SIMPSON STRONG-TIE
$77.30
SKU: Simpson-PBV10PC-1
Simpson-PBV10PC-1Simpson PBV10PC 10-Inch Black Powder-Coated Hidden Standoff Post Base
The PBV is designed to make a hidden connection between viga posts and concrete. This circular, hidden standoff post base attaches to concrete with threaded rod and epoxy to the bottom of the viga post with Strong-Drive® SDS Heavy-Duty Connector screws for a secure connection. The PBV comes in two different sizes to support a variety of projects.
Key Features
- Round shape to match viga-style posts
- Black powder-coated finish
- 1" standoff to help prevent rot at the end of the post
Material
- 14 gauge
Finish
- Black powder coat or galvanized
Installation
Post:
- Drill a 3/4"-diameter hole, 10" into the center of the post.
- Clean out sawdust. Fill hole halfway with Simpson Strong-Tie® SET-3G™ epoxy anchoring adhesive.
- Insert all-thread rod while twisting the rod, and allow the epoxy to set and cure.
- Secure standoff to post using four Strong-Drive SDS Heavy-Duty Connector screws (sold separately).
Concrete:
- Drill a 3/4"-diameter hole per anchor design a min. 4 3/4" from the edge.
- Clean out dust. Fill hole halfway with Simpson Strong-Tie SET-3G epoxy anchoring adhesive. Insert post subassembly into hole, and allow the epoxy to set and cure.
- Post bases do not provide adequate resistance to prevent members from rotating about the base and therefore are not recommended for non-top-supported installations (such as fences or unbraced carports).
Ordering Information
- For black powder coat, order PBV6PC or PBV10PC. For galvanized coating, order PBV6 or PBV10.
Please Note: This product image may represent a range of products; it may not be an exact representation of the product purchased.
By Manufacturer