SKU: Simpson-VGTL-6
Simpson-VGTL-6The VGT is a girder tiedown for moderate- to high-load applications with girder trusses. This variable tiedown is designed for installation on the side of a truss, and it attaches with Strong-Drive® SDS Heavy-Duty Connector screws. The VGT can be bolted down into place in combination with a holdown or bolted directly to the foundation.
Key Features
- Suitable for retrofit applications
- Available with one flange concealed for attachment to trusses with no tail
- Load rated to resist high-wind forces
Material
- 7 gauge
Finish
- Galvanized
Installation
- Strong-Drive SDS Heavy-Duty Connector screws included
- The product can be installed in a single application or in pairs to achieve a higher uplift capacity
- Can be installed on roof pitches up to 8/12 or on a bottom chord designed to transfer the load
- Screw holes are configured to allow for double installation on a two-ply (minimum) truss
- When installing on trusses with no overhangs, specify VGTR/L
- Install washer component (provided) so top of washer is horizontal and parallel with top plate of wall
Please Note: This product image may represent a range of products; it may not be an exact representation of the product purchased.
By Manufacturer
