Simpson Strong-Tie SET-XP10 8.5 Oz Cartridge High Strength Anchoring Set-XP 12 Pack



SKU: WH-Simpson-SET-XP10-12


Simpson Strong Tie SET-XP10 12 Pack 8.5 fl oz cartridge is an epoxy-based high-strength anchoring adhesive. SET-XP is a 1:1 ratio, two-component anchoring adhesive for anchoring and doweling into concrete (cracked and uncracked) and masonry (uncracked) applications.  Pack of 12 cartridges with each one containing it's own individual nozzle.

SET-XP epoxy anchoring adhesive is a high-strength formula for anchoring and doweling in cracked and uncracked concrete and masonry applications. 

Key Features

  • Design flexibility — permitted for sustained load performance at elevated temperature.
  • Jobsite versatility — can be specified for dry and damp conditions when in-service temperatures range from -40°F (-40°C) to 150°F (65°C).
  • Recognized per AC308 to be used for rebar development and splice length design provisions of ACI 318.
  • Approved for installation with vacuum-drill bit system without further hole cleaning. See Code Report (ESR-2508) for approved system.
  • Easy hole-cleaning — no power-brushing required.
  • Manufactured in the USA using global materials.
Mix Ratio/Type 1:1 epoxy
Mixed Color Teal
Base Materials Concrete — cracked and uncracked
Masonry — uncracked
Base Material Conditions Dry, water-saturated
Anchor Type Threaded rod or rebar
Substrate Installation Temperature 50°F (4°C) to 110°F (38°C)
In-Service Temperature Range -40°F (-40°C) to 150°F (65°C)
Storage Temperature 45°F (7°C) and 90°F (32°C)
Shelf Life 24 months
Volatile Organic Compound (VOC) 3 g/L


  • Concrete: Cracked
  • Concrete Block: Grouted
  • Concrete Block: Hollow (Ungrouted)
  • Seismic (New Construction)
  • Seismic Retrofit
  • Water / Wastewater Facilities

Please Note: This product image may represent a range of products; it may not be an exact representation of the product purchased.