Big Timber 5FHD14314 #14 x 3-1/4 T-30 Flat Head Self Drill Star Dr Screw 5 LB

SELF-DRILL WITH REAMER WINGS

• ACQ & Pressure-Treated Compatible
• Wood-to-Steel Application
• Bronze Exterior Coating
• Star Drive
• Flat Head

BENEFITS & FEATURES

• High-Quality Heat-Treated Steel for high tensile and superior shear strength
• Works on hard and soft woods
• Flat head for smooth flush surface
• Deep Six-Lobe Star Drive Recess reduces cam-out and end load
• Handles 2X the torque of Phillips or square drive while extending the life of the bit
• Self-Drilling Tip gives screw a drill capacity (through metal) up to 1/4”
- Recommended Drill Speed is 2000 RPM
• Deep Chip Cavity collects metal shavings to prevent interference with cutting threads
• Metal wings on the screw shank are designed to ream out the wood then break off when they encounter metal
- Wings prevent the screw thread from engaging into wood before the metal
• High Performance triple layer (ACQ Compatible) bronze corrosion resistant coating #10 x 1-5/8” to #14 x 3-1/4ʺ

COMMON USES INCLUDE

Ideal for fastening sheathing or dimension lumber to steel and/or aluminum such as:
• Truck Beds
• Trailers - Horse, Utility, ATV, Motorcycle, Snowmobile, and Flatbed
• Docks
• Wall Liners

NOTE: Always follow lumber manufacturer’s recommendations.

Available Drive and Shank Sizes:
- T25 (#10 / 0.151 in)
- T25 (#12 / 0.132 in)
- T30 (#14 / 0.168 in)
Diameter / Drive Length
0.151 / T25 1⅝
0.132 / T25 2½
0.168 / T30 3¼

NOTE: Overdriving may result in fastener failure. The fastener is
fully seated when the head’s bearing surface is flush with the
material being attached. DO NOT OVER TORQUE and always follow
lumber manufacturer’s recommendations.

Please Note: This product image may represent a range of products; it may not be an exact representation of the product purchased.