SKU: Simpson-AT-XP30-5
Simpson-AT-XP30-5Simpson Strong-Tie AT-XP30 30 Oz AT-XP Adhesive With Nozzle
T-XP is an acrylic-based high-strength anchoring adhesive. AT-XP is a 10:1 ratio, two-component, anchoring adhesive for use in threaded rod and rebar into concrete (cracked and uncracked) and masonry (uncracked) under a wide range of conditions. AT-XP adhesive dispenses easily in cold or warm environments and in below-freezing temperatures with no need to warm the cartridge.
Key Features
- Excellent for use in cold weather conditions or applications where fast cure is required.
- Design flexibility — superior sustained load performance at elevated temperature.
- Jobsite versatility — can be specified for dry and damp conditions when in-service temperatures range from -40°F (-40°C) to 180°F (82°C).
- Approved for installation with vacuum-drill bit system without further hole cleaning. See Code Report (ER-263) for approved system.
- Passed the demanding ICC-ES AC308 adverse-condition tests pertaining to reduced and elevated temperatures and long-term sustained loads.
- Easy hole-cleaning procedure — no power-brushing required.
- Manufactured in the USA using global materials.
| Mix Ratio/Type | 10:1 acrylic |
| Mixed Color | Teal |
| Base Materials | Concrete — cracked and uncracked Masonry — uncracked |
| Base Material Conditions | Dry, water-saturated |
| Anchor Type | Threaded rod or rebar |
| Substrate Installation Temperature | 14°F (-10°C) to 100°F (38°C) |
| In-Service Temperature Range | -40°F (-40°C) to 180°F (82°C) |
| Storage Temperature | 14°F (10°C) and 80°F (27°C) |
| Shelf Life | 18 months for AT-XP10; 12 months for AT-XP13 and AT-XP30 |
| Volatile Organic Compound (VOC) | 30 g/L |
Included Parts
- AMN19Q Included with each cartridge
Please Note: This product image may represent a range of products; it may not be an exact representation of the product purchased.
By Manufacturer
